VPI Classic 3 Manual de Instruções

The 30th Anniversary VPI Classic Turntable Setup and Instruction Manual VPI Industries, Inc., 77 Cliffwood Ave. #3B, Cliffwood, NJ 07721 ph

9 should eliminate the hum. If the hum goes away, get quality, well shielded interconnects. • After at least one year of use, the platter bearing and

1 Important: Read Before Proceeding!  Read and follow the Safety Instructions below.  Save all packing materials. The Classic should only be moved

2 Unpacking the Box The turntable and tonearm are packed very carefully to avoid damage during shipping. It is important that you save the packing mat

3 Setting up the Classic The Classic must be placed on a flat, level surface. This will make setup easy, provide better sound quality, and put less st

4 Installing and Aligning the Cartridge • Remove the protective cover from the male pivot point on the arm base assembly. To avoid injury, do not t

5 • Line up the red dot on the Lemo connector with the red dot on the receptacle on the junction box. The Lemo connector can plug in only one way and

6 VPI has conducted careful listening tests and determined that every tonearm we tried sounded better with its mechanical anti-skating disabled and th

7 back, you can order a heavier weight from your dealer. We have six different counterweights to accommodate any cartridge made. The JMW Signature To

8 • If it is not level, use the supplied Allen wrench to loosen the setscrew on the counterweight and rotate the counterweight around the shaft until